Here are the items to complete to successfully run a cross-listed auction:
Item | |
Pre-auction | Onboard to ATG White Label and GAP Toolbox |
Get started with cross-listing | |
Create your cross-listed timed auction | |
Proof and publish your cross-listed auction | |
During-auction | Bidder management |
Bid management | |
Post-auction | Results and Invoicing |
Billing and Commissions |
Onboard to ATG White Label
Auction Technology Group (ATG) has served the auction industry for 50+ years, 20+ of which as the leading technology and marketplace provider for the international auction industry. ATG White Label is built to help you grow your business efficiently, effortlessly, through a best-of-both-worlds solution - future-proofing your business with cutting-edge technology.
During your ATG Cross-Listing onboarding you will be shown ATG White Label, its back-office tool GAP Toolbox and the features relevant for cross-listed timed auctions.
Please contact Seller Support if you have any further questions about ATG White Label.
Get Started with Cross-Listing
Built to maximize your hammer prices, atgXL is a multi-marketplace integration from Auction Technology Group (ATG) that allows you to seamlessly list your timed auction on multiple ATG platforms.
There are some considerations that need to be made when creating and cross listing your Proxibid timed auction:
- Changes and edits should be made primarily in AuctionBuilder, these changes in the most part will automatically synchronize with GAP Toolbox (ATG White Label).
- There are some features that are not available on a cross-listed Proxibid timed auction. This table gives more details on these.
- The auction Start Time needs to be at least one hour in the future when publishing your auction in AuctionBuilder. This will give time to go into GAP Toolbox (ATG White Label) and confirm all auction options before bidding begins. Once an auction's start time has passed, event details cannot be edited. If edits / adjustments must be made after the auction start time, please contact Seller Support.
- Images can take time to export and sync to your additional marketplaces, up to several hours depending on size of catalog. Please consider this when setting the auction Start Time.
- Increment tables in AuctionBuilder Proxibid and GAP Toolbox (ATG White Label) must match exactly. Create a Timed auction increment table in AuctionBuilder called "sbs", select this during auction creation and it will synchronize with GAP Toolbox (ATG White Label). More details on creating correct increment tables.
- Reserves given to lots should not be adjusted once the auction has been published.
- When using Wavebid for cataloging a cross-listed timed auction the auction should be created in AuctionBuilder (Proxibid) and then linked in Wavebid. More details here.
- When using Wavebid for post-auction sale results and invoicing for a cross-listed timed auction, some details may need to be manually imported into Wavebid. More details here.
Increment tables for cross-listed timed auctions
- The increment table can have a maximum of 40 increment steps and no more.
- The increment value at one step cannot be smaller than the value at the preceding step.
- E.g. Here the increment value at the final step cannot be $2, it has to be $5 or greater.
- $0 < $10 = $2, $10 < $20 = $5, $20 < $30 = $2.
- E.g. Here the increment value at the final step cannot be $2, it has to be $5 or greater.
- Increments must be a factor of the lower bound increment range (i.e. if the lower bound increment range were to be divided by the increment it would produce a whole number).
- E.g. $400 > $700 with an increment of $20. If the lower bound increment range = $400 and the upper bound increment range = $700, $20 is an accepted increment as 400 is divisible by 20.
- E.g. $400 > $700 with an increment of $30 is not acceptable as 400 isn't divisible by 30.
Creating a New Auction
1. Log into your AuctionBuilder account
2. Click the Create New Event link located on the left side of the page under AuctionTools.
- It is essential you do not create the new event via the ‘New Event’ link found at the top-right of Event Management pages.
3. A new section will appear in the center of the page.
a. To create an event without using a pre-built template, click the Create a New Event link.
b. Or create an event using a pre-built template by selecting one from the Pre-built Template field.
4. Click the Go button.
On the following event set-up page:
5. Ensure that Timed is selected as the Event Type.
6. Select the option to Cross-list my auction. Select Proxibid.com White Label as a Marketplace that your auction will be cross-listed on.
- These selections cannot be changed once the event is created.
- To cross list the timed auction to other ATG marketplaces and/or ATG White Label, you must first have those marketplaces enabled on your account and should review the details in these guides.
7. Enter an Event Title and Description.
- The Event Title has a 50-character limit.
- The Event Description has a 200-character limit.
8. Select Primary and Additional Categories.
- A primary category that best matches the auction should be selected in AuctionBuilder (Proxibid). All Proxibid primary categories are mapped automatically to GAP Toolbox I&C primary categories, although the naming of them is different.
- Lot-level categorization in AuctionBuilder (Proxibid) is done in the same way as for a non-cross-listed auction.
- Lot-level categorization in GAP Toolbox (ATG White Label) will be handled by ATG’s autocategorization tool. This tool reviews the uploaded lot’s title, details and primary category to determine which subcategory it best falls into.
9. Select the event's Approval Criteria for Buyers.
- Approval settings set in AuctionBuilder (Proxibid) do not sync to GAP Toolbox (ATG White Label).
- With support from an ATG admin, approval settings will need to be defined and included in the default settings of your GAP Toolbox account. These settings will be set during GAP Toolbox account creation, are set at the account level, apply to ATG White Label bidders, and any changes can only be made by contacting Seller Support.
10. Enter the bidding start time and end time, as well as the closing time increment.
- The auction Start Time needs to be at least one hour in the future when publishing your auction in AuctionBuilder. This will give time to go into GAP Toolbox and confirm all auction options before bidding begins.
11. Select a Currency.
12. Enter the Sequential Paddle Number.
- Ensure that significantly different ranges of paddle numbers are used for each marketplace.
- E.g. Proxibid paddle seed could be set in AuctionBuilder to start at 1,000 and the ATG White Label paddle seed could be set in GAP Toolbox to start at 4,000 - to avoid potentially crossover.
13. Check the Require SSN box to require that all bidders enter the last 4 digits of their Social Security Number (SSN) when registering for the event on Proxibid.
- This setting will not synchronize with ATG White Label, nor is this a feature available on ATG White Label.
14. Click the "Choose File" button to select a Feature Image. This will be the image associated with the auction event on Proxibid.
- The Feature image or auction “hero image” will not sync from AuctionBuilder (Proxibid) to ATG White Label. On your white label, the auction hero image is defaulted to the first image of the first lot in the auction.
The Next Page brings up Payment, Terms & Conditions.
- The Payment & Terms page provides an auction company's contact information to bidders, and also contains the terms and conditions bidders agree to when they enter an auction event.
- Payment & Terms details will not fully sync from AuctionBuilder to GAP Toolbox. Payment & Terms detail will need to be included in the auction's Terms and Conditions on ATG White Label. This can be done in GAP Toolbox once the auction has been created in AuctionBuilder and pushed across to GAP Toolbox.
Accepted cards and payment options selected in AuctionBuilder will not sync from AuctionBuilder to GAP Toolbox. When your GAP Toolbox account is created, a set of default settings will be applied to your auctions on ATG White Label for bidder registration and verification. These accepted cards are set at the account level and cannot be changed per event. Please contact Seller Support if you wish to adjust the accepted cards from the defaults.
Defaulted Accepted Cards (for registration / verification) |
Visa Visa Debit Mastercard Mastercard Debit American Express |
15. After reviewing the customer billing template page and clicking Save your event will automatically be created in GAP Toolbox (ATG White Label).
Importing Lots & Images
You can upload lots and images in the same way you would normally in AuctionBuilder - through the Bulk Loader or Catalog Generator.
- Lots and images should only be added and edited in AuctionBuilder (Proxibid) and not in GAP Toolbox (ATG White Label).
- Images can take time to export and sync to your additional marketplaces, up to several hours depending on size of catalog.
- When using Wavebid for cataloging a cross-listed timed auction the auction should be created in AuctionBuilder (Proxibid) and then linked in Wavebid. From there you can then upload the catalog and images. More details here.
Setting Prices & Reserves
Set Prices and Reserves in the same way you would normally when cataloging a timed auction in AuctionBuilder.
- For cross-listed timed auctions, ask prices and reserves that are off-increment will be rounded up to the next valid increment. This is to ensure bid alignment between Proxibid and ATG White Label for the auction.
- An asking price equal to your first valid increment will be automatically created if one is not specified.
Look out for notifications when an alteration is made:
Deposits
Deposits are not supported on ATG White Label for cross-listed timed auctions.
Market your Auction
The Auctioneer Marketing Program (AMP) is a comprehensive marketing solution for clients looking to promote their businesses. This program offers a range of marketing services, including newsletter promotions and website advertisements, designed to reach a wider audience and increase brand visibility. Book effective marketing campaigns tailored to your goals, ultimately driving more traffic, engagement, and sales.
Proxibid AMP
Contact your Client Success Manager who can work with you in maximizing your auction’s success with Auctioneer Marketing Program support.
Proof and Publish your Cross-Listed Timed Auction
Auction status is synchronized from AuctionBuilder (Proxibid) to GAP Toolbox however, the auction’s status must be set in a specific order for the sync to work properly. The only status progression in AuctionBuilder (Proxibid) that will work is:
Disabled > Pending > Online
- A cross-listed timed auction cannot be switched straight from Disabled to Online in AuctionBuilder (Proxibid), this will not sync with GAP Toolbox (ATG White Label).
- Once an auction's start time has passed, event details should not be edited. If edits / adjustments must be made after the auction start time, please contact Seller Support.
This table describes the status pairings and what you will see on each back-office tool:
Status in Proxibid (AuctionBuilder) | Status of ATG White Label event (GAP Toolbox) |
|
Awaiting Approval |
|
Approved |
|
Published |
Auction Edits
Edits to auction or lot information must only be undertaken in AuctionBuilder (Proxibid) and not directly in GAP Toolbox (ATG White Label).
Bidder Management for Cross-Listed Auctions
Bidder management, bid retractions and post-sale steps are handled separately on the relevant marketplace tools.
- Proxibid bidder management. This should be handled in AuctionBuilder for Proxibid bidders. More details here.
- ATG White Label bidder management. This should be handled in GAP Toolbox for ATG White Label bidders. More details here.
-
- Locate the cross-listed auction. Search for the auction title in the event dropdown/search (on the left-hand side).
- Click the link to your auction. This will open the auction details and settings page.
- Click the Bidders option to show registered bidders for the auction.
Registered Bidders
View, sort, and filter the list of bidders who have registered for your auction in each respective marketplace.
- Registered Proxibid Bidders. Locate the auction in AuctionBuilder, navigate to the Registered Bidders page found under Auction Tools. Managing registered Proxibid bidders.
- Registered ATG White Label Bidders. To access your ATG White Label bidders, go to your current auction in the GAP Toolbox and select Bidders in the left-hand navigation panel, the Current View should be set to All. Managing registered BidSpotter bidders.
Actioning / Approving Bidders
Accepting, declining, or reporting pending bidders is handled in each respective marketplace.
- Approving Proxibid bidders. More details here.
The Registered Bidders page houses information related to bidders who have registered for an event. This page can be accessed by clicking the Registered Bidders link located on the left side of the page in AuctionBuilder under Auction Tools.
Click on the Status drop-down to filter bidders based on their status:
- Pending: Awaiting review by the Proxibid Risk team.
- Accepted: Allowed access to bid in the event.
- Declined: Denied from bidding in the event.
- In Review: Has had an initial review by the Proxibid Risk Team but has not yet been approved.
- All: Displays all bidders
Click on the Sort By drop-down to sort bidders by:
- Paddle Number
- Name (first or last)
- Username
- Hammer Rating
- Phone Number
To accept a pending bidder, click the Accept link to the right of the bidder's name. By accepting a bidder, the bidder will be able to participate in the event and will not be required to provide any further personal information. It is important to remember that any bidders approved outside of MarketGuard guidelines, would be the responsibility of the Auction House.
To decline a bidder, click on the Three Dots located to the far right of the bidder's name and select Decline. By declining a bidder, the bidder will not be able to participate in the event. Even if the bidder takes further steps to complete the registration process, the bidder will remain declined unless manual action is taken by the seller or by Seller Support.
- Approving ATG White Label bidders. More details here.
Registration details can be viewed on the Bidders screen of your auction. Here you’ll find the important information relating to each individual bidder based on their registration status and previous activity on ATG Marketplaces.
- It is the responsibility of the auctioneer to review all online registrants and manage the approval of each online bidder.
To access your bidders, go to your current auction in the GAP Toolbox and select Bidders in the left-hand navigation panel, the Current View should be set to All.
- If you see 0 results but know there are bidders, check the Current View in the upper right corner and make sure it is sorted to "All" and not "Pending Bids".
When viewing all bidders in the Bidders Tab, you'll be able to see the specific bidder’s status. You can click on the status to update it. You can change the status to Approved or Declined at any time.
- Once changed from Pending, it is impossible to change it back to a Pending status.
If the bidders record is highlighted in Yellow – this means the bidder is currently blocked by another auction house.
If the bidder’s record is highlighted in Red – this means that the bidder’s account has been suspended by ATG subsequent to their current registration. They will not be able to participate in your auction whilst they are suspended.
- If the bidder has any active Max bids and was approved before being banned, the Max bids will still be active unless removed.
Unverified email addresses or telephone numbers are highlighted in Red.
Bid Management for cross-listed timed auctions
Retracting Bids
We recommend that if you require a bid to be retracted/removed during a cross-listed timed auction that you contact Seller Support.
- Should you have any questions concerning removing bids, please contact Seller Support at:
- Email: seller.support@auctiontechnologygroup.com
- Phone: +1 (866) 597-2437
Post-auction Steps
- It is important that you only close your auction once it is finished. Do not attempt to close the auction midway through or between selling days where your sale covers more than one day.
Closing the auction in AuctionBuilder. Close the auction by setting the status to Closed.
- Navigate to the event's Listing page.
- Select a new status from the Status drop-down.
- Ensure that all bidding in the auction has been completed and select Closed.
- Click the Update button located in the bottom-right corner of the page. A confirmation message will appear.
Results & Reporting
Reports from AuctionBuilder (Proxibid). These will only show buyer details of Proxibid bidders. Bids from BidSpotter will be represented in Proxibid by “offsiteBidder” with a paddle number of “-3”. Buyer details for these bidders can be accessed via GAP Toolbox.
Proxibid reporting. More details here.
The results in GAP Toolbox. These will show all bids, but only correct buyer details for BidSpotter bidders. Proxibid bidders will be displayed as “PB xxxxxxxx”.
ATG White Label (GAP Toolbox) exporting auction results. More details here.
- When using Wavebid for post-auction sale results and invoicing for a cross-listed timed auction, some details from the GAP Toolbox (ATG White Label) export may need to be manually imported into Wavebid. More details here.
- Passing lots should follow the standard steps of the marketplace the winning bidder is on. More details here on passing lots in AuctionBuilder Proxibid.
Invoicing
Notifying and invoicing your winning bidders must be conducted on each of the marketplaces your auction is listed, results are not consolidated into one place automatically.
- ATG White Label bidders will be represented in AuctionBuilder (Proxibid) by “offsiteBidder”.
- If the intention is to invoice Proxibid bidders through atgPay, these ATG White Label bidders will need to be removed or excluded from the invoice list before invoicing.
- Proxibid bidders in AuctionBuilder can be invoiced in the normal way.
- Proxibid bidders will be represented in GAP Toolbox as “PB xxxxxxxx”.
- These bidders will need to be removed from the winning bidder export from GAP Toolbox before invoicing.
-
Plug'nPay is available on ATG White Label for ATG White Label bidders.
-
An e-Commerce merchant account is required, please contact Seller Support for more information on setting this up on your GAP Toolbox account.
-
Please note that Plug'N Pay can only be used if set up ahead of creating a cross-listed timed auction.
-
- It's important to note that Winners' Notifications from GAP Toolbox are not invoices and should not be sent to winning bidders as such.
- When using Wavebid for post-auction sale results and invoicing for a cross-listed timed auction, some details from the GAP Toolbox (ATG White Label) export may need to be manually imported into Wavebid. More details here.
Billing & Commissions
Buyer Premiums
Buyer’s premium for cross-listed auctions will be taken from the account-level on Proxibid and will synchronize on ATG White Label.
- Ensure you have the required account-level Buyer’s Premium set in AuctionBuilder Proxibid when creating a cross-listed event. If you do not, are not sure what it is, or want to adjust the value, please contact Seller Support.
- Tiered buyer’s premiums are not supported on timed auctions cross listed from Proxibid to BidSpotter.
Client Commissions
Listing fees and commissions can be found in the Proxibid rate card - your Client Success Manager will confirm listing fees and commissions with you ahead of the auction.
Billing
Billing will be handled separately for Proxibid and ATG White Label. You will likely receive two invoices (one from Proxibid, one from ATG White Label) and they will both be in your native currency ($ for US Proxibid clients).
Feature Differences, Gaps and Settings Specific to Cross-Listed Timed Auctions.
This table describes the features that are not available on timed auctions cross listed from Proxibid to ATG White Label. It also describes the auction and lot fields that don’t automatically sync from AuctionBuilder (Proxibid) to GAP Toolbox (your ATG White Label) or align:
- Enabling these features where they are not available on ATG White Label will result in disruption to your cross-listed timed auction and in some cases can only be remedied by shutting down the entire auction on all marketplaces.
Feature | Availability | Notes |
Live auctions | Not available | atgXL supports cross-listed Timed auctions only. |
Tiered Buyer's premium | Not available | ATG White Label only supports flat-rate buyer's premiums per auction. |
Requiring SSN | Not available | There is no option on ATG White Label to request an SSN from a bidder as part of registration. |
Payments: atgPay | Not available |
atgPay is not available on ATG White Label, nor should it be used to charge ATG White Label bidders. atgPay can only be used to charge Proxibid bidders. Plug'nPay is available on atgWL. An e-Commerce merchant account is required, please contact Seller Support to assist with getting set up. |
Deposits | Not available | Deposits are not supported on ATG White Label. |
Invoice Comment | Not available | This comment does not sync to ATG White Label. |
Seller Info | Not available | This information does not sync to ATG White Label. |
Proxibid Payments and Terms | Not available |
Payment terms will need to be included in the auction's Terms and Conditions on ATG White Label. This can be done in GAP Toolbox once the auction has been created in AuctionBuilder and pushed across to GAP Toolbox. Accepted cards and payment options selected in AuctionBuilder will not sync from AuctionBuilder to GAP Toolbox. When your GAP Toolbox account is created, a set of default settings will be applied to your auctions on ATG White Label for bidder registration and verification. These accepted cards are set at the account level and cannot be changed per event. Please contact Seller Support if you wish to adjust the accepted cards from the defaults. |
Make an offer | Not available | This feature should not be selected or utilized in AuctionBuilder. |
Lot numbers with alpha character at front of lot number | Not available |
Lot numbers with an alpha character at the beginning of the lot number (e.g. A1 or B1) are not supported on ATG White Label. Lots will not appear on ATG White Label unless that alpha character is moved to the end of the lot number or removed. Lots with special characters (ex. 12.2, 12_2, 12-2) in the Lot Number will also not appear on ATG White Label. |
Renumbering and Reordering lots using Bulk Loader | - |
To re-number lots: To reorder lots: |
Meta data: Condition, Model, Year | Partially available | Condition, Year, Model etc. from Proxibid is added into the lot description on ATG White Label. |
Meta data: Estimates | Partially available | Estimates given in Proxibid are added into the lot description on ATG White Label. |
Multi-ring / Linked auctions | Partially available |
Auctions can be linked in AuctionBuilder (Proxibid) but the auctions on ATG White Label will not be linked. If linking cross-listed events, it's recommended to link them when they are in a "Disabled" state. When events are linked on Proxibid, items cannot be moved between linked auctions – this will cause breaking issue for the cross-listed timed auction. |
Featured Image | Partially available | Featured Images selected in Proxibid are not synced to ATG White Label. The first image from the first lot will be the default "Hero image" on ATG White Label. |
Categorization | Partially available |
Primary and secondary categories specified in Proxibid will not map directly to ATG White Label. The most appropriate GAP Toolbox I&C categories will be given to items on ATG White Label. |
Auto-approval rules | Partially available | Auto-approval rules set in Proxibid including MarketGuard tiers are not synced to ATG White Label. Default auto-approval rules are set on your ATG White Label (GAP Toolbox) account. These defaults can be adjusted by contacting Seller Support. |
Sequential paddle numbers | Partially available |
The seed for sequential paddle numbers should be significantly different between Proxibid and ATG White Label to ensure no crossover. The default paddle setting in GAP Toolbox may be set to "Customer reference", this needs to be adjusted to "Numbers starting from" to accommodate cross-listed timed auctions. |
Category mapping
This table shows the primary category mapping from Proxibid to ATG White Label:
Proxibid Primary Category |
> |
ATG White Label (GAP Toolbox) Default Primary Category |
Art, Antiques & Collectibles | > | Other Industries |
Cars & Vehicles | > | Automotive & Vehicles |
Collector Cars | > | Automotive & Vehicles |
Computers & Electronics | > | Computer & Electronics |
Farm Equipment & Machinery | > | Agricultural Equipment |
Guns & Military Artifacts | > | Other Industries |
Horse & Livestock | > | Agricultural Equipment |
Jewelry, Gemstones & Watches | > | Other Industries |
Benefit & Charity | > | Other Industries |
Coins & Currency | > | Other Industries |
Commercial Trucks | > | Automotive & Vehicles |
Estate & Personal Property | > | Real Estate |
Fine Art & Rare Memorabilia | > | Other Industries |
Heavy Construction Equipment | > | Heavy Construction Equipment |
Industrial Machinery & Equipment | > | Industrial & Commercial |
Real Estate | > | Real Estate |